The special monobloc manufacture, confer to the steel frame a high resistance at the effort of leverage so frequent during work. The hammer is built from a single piece without tie-rod, so removing a very common problem in conventional hammer.
To avoid that working the failed blows reverberating on the structure, it was conceived a special hydraulic brake that reduce the power out of 60 % when the point is not on the material to demolish.
It is unchannged the possibilityto pull down little protuberances from the wall with full power.
Our breakers work utilizing inertial n2 energy recuperation system. The Nitrogen gas operating system give to the hammer a lot of power and reduces solicitations to the excavator hinged arm.

In the past, the breakers with n2 energy recuperation system, needed frequent recharge.
With our new S series, using special gas ring on floating bearing, we increasing out of 300 % the n2 life charge.
Our breaker, with monobloc body in association with shut framewerk and sound absorbent material insertion,has permitted to reach sound emissions level very low. In heavy condition, the cooling is guaranteed by internal labyrinth with thermosiphon effect.

The S series is designed to withstand extremely high counter-pressure and widesetting range of the oil flow in order to facilitate the installation.
Series S hammers, with their particular tapered shape, guarantee a very good visual during work and allow to operate very close to the walls.